Raimondiusa.com HomepageTile Contractor Tools

RLS Tile Leveling Spacers

1-yr Warranty
Owners Manual
Patented
     
 

Approved By

Mapei

Laticrete

Custom Building Products
 

Media

Raimondi Tile Leveiling System, RLS

Floor Install Video (2:50)

 

Raimondi Tile Leveiling System, RLS

Wall Install Video (2:24)

 

PDF Media

RLS Coverage Estimator
(303 KB)
 

Raimondi Tile Leveiling System, RLS

Brochure
(2.53 MB)

Raimondi Tile Leveling SystemRaimondi Leveling Spacers have been sold in Europe for quite a few years and finally we're able to introduce them to you!


If you're a tile installer, you're well aware of how difficult it is to properly set flexible, large format, heavy, or low-thickness tiles because, often times, the floor foundation is uneven and/or contains imperfections. To make matters worse, tiles that seemed uniformly levelled while first installing them result in tiles that show differences as the tile adhesive sets, compromising the overall aesthetics of your initial hard work.


With the Raimondi Leveling Spacers, this potential is no longer a threat to your perfect tile project. In addition to ensuring the proper leveling of tiles, this system helps speed the tile setting process.

 

Floor Installation Example

TILE COVERAGE:
The Raimondi Tile Leveling System's Standard Kit comes with: 1 RLS floor pliers, 100 spacers and 100 wedges. The wedges can be used over and over again so you'll only need as many wedges as you can set in 1 day. The spacer clips that are needed will depend largely on how big and thick the individual tiles are for your project as well as your tile layout pattern.

Generally speaking...

 

Raimondi Tile Leveiling System, RLS



HOW TO USE:

STEP 1
After spreading your tile adhesive, insert leveling spacer underneath the tiles along the 4 sides, use traditional spacers as you normally would to square up the corners. For larger tiles, it may be necessary to "double up", using 2 leveling spacers for each side.


STEP 2
Set the tile and beat it with a rubber mallet

STEP 3
Use the special traction-adjustable pliers to insert the wedge into the leveling spacers, paying attention not to pass the breakpoint.

STEP 4
Once the tile adhesive has been allowed to set. Remove the leveling spacers with the traction-adjustable pliers, rubber mallet, or kicking them out with your feet.

 

FEATURES:
  Greatly improves the overall quality of your tile project
  Both installation and removal of the spacers are quick and easy!
  Strudy Tile Wedge holds tiles better than competitors
  Works well with both Wall and Floor projects!
 

Tiles are not pulled from the thinset, they're pushed into it.

  Rather than worrying about voids and coverage, RLS spacers futher enhance your thinset adhesion to your tiles!!

TECH SPECS:
    Minimum required joint ........... 1.5-mm (1/16")
    Minimum tile thickness..................... 3-mm (1/8")
    Maximum tile thickness .................... 12-mm (1/2")
       
N63 W22611 Main St. Unit C - Sussex, WI 53089    t: (800) 625-6686   f: (262) 790-6749   
Property of Raimondi Utensili © 2009